Enespro Headed to NECA and NSC Conferences 2018

By: Mike Enright

It’s been an exciting time since we launched Enespro PPE earlier this year. While the first few months have been busy, we’re gearing up for two major events in the coming months where we will be showcasing our electrical personal protective equipment, speaking with the press about our launch, and we’ll have something special for those of you that drop by our booth.

While we may be an up-and-comer in the PPE market, we have spent decades building relationships with electrical contractors and safety professionals, and are excited to announce that we will be hitting the road this fall to head to two of the most important events for each: The NECA Show and the NSC Congress & Expo.

The NECA Show: September 27-October 2, 2018, Pennsylvania Convention Center, Philadelphia, PA

Our first conference this year is the event of the year for those in the electrical construction industry. Boasting a 95.2% satisfaction rating, over 6,200 attendees from all 50 states and 13 countries came together last year to learn, network, and see what’s new and what’s next in the electrical construction industry.

This year’s event, expected to once again be the largest of its kind, heads to the Pennsylvania Convention Center in Philadelphia, PA for six days this fall. From the exhibitor showcase to a wide range of education sessions, we’re proud to say that we will be making our way to “The Show for Those Who Power the World.”

Showstopper Showcase Featuring AirLite™ 40 cal Suits and OptiShield™ Technology

The Showstopper Showcase and Awards is designed to identify the newest innovations in products and services for electrical construction professionals. This year, we are bringing two products to the Showstopper Showcase (Booth #4000), our AirLite™ 40 cal Suits and OptiShield™ Hoods. These solutions are designed for mission critical work and are designed not only for safety but for comfort as well.

AirLite™ 40 cal Suits

When you need arc flash protection for all categories of NFPA 70E (PPE CAT 1, 2, 3 & 4), the AirLite™ 40 cal Suit is there for you. With a super lightweight fabric system and an Arc Rating of 43 Cal/cm², these suits are designed for mission critical work at optimal comfort. These products will be on display at the Showstopper Showcase (Booth #4000) as well as our exhibit (Booth #536). Learn more about our entire line of 40 CAL AirLite™ kits below:

• 40 CAL Enespro AirLite™ Arc Flash KIT with Standard Hood
• 40 CAL Enespro AirLite™ Arc Flash KIT with OptiShield™ Vented Lift-Front Hood & MSA V-Gard® Hard Hat
• 40 CAL Enespro AirLite™ Arc Flash KIT with OptiShield™ with DUAL Fan Hood

OptiShield™ Vented Lift-Front Hoods

When you’re working in the field, you need to see what you’re working on. The new grey tinted technology in the OptiShield Vented Lift-Front hood dramatically improves color recognition and visibility vs. legacy green tinted shields. This is critically important to help distinguish color differences in wires. It has multiple vents to increase airflow and reduce fogging while working in the hazard zone. The shield flips open to quickly enjoy fresh air when outside of the hazard zone. Auditory vents along the sides of the hood improve hearing and communication while on the job. Get to know the OptiShield™ Vented Lift-Front Hood at the Showstopper Showcase, our booth, and by clicking on this link:

• 40 CAL Enespro AirLite™ OptiShield™ Vented Lift-Front Hood & MSA V-Gard® Hard Hat

And by see the rest of the OptiShield^TM line clicking the links below:

• 12 Cal Enespro OptiShield™ Faceshield & MSA V-Gard® Hard Hat
• 20 CAL Enespro OptiShield™ Faceshield & MSA V-Gard® Hard Hat
• 40 CAL Enespro OptiShield™ Hood & MSA V-Gard® Hard Hat
• 40 CAL Enespro OptiShield™ Vented Lift-Front Hood & MSA V-Gard® Hard Hat
• 40 CAL Enespro OptiShield Hood with DUAL FANS & MSA V-Gard Hard Hat
• 40 CAL Enespro AirLite™ OptiShield™ Faceshield & MSA V-Gard® Hard Hat
• 40 CAL Enespro AirLite™ OptiShield™ Hood with DUAL FANS & MSA V-Gard® Hard Hat

Get to Know Enespro PPE at The NECA Show. Browse Products and Meet the Team at Booth 536

We look forward to seeing everyone at the NECA Show in Philly! Stay tuned for a special announcement about a giveaway we will be running at our booth by following us on our social media profiles.

NSC Congress and Expo: October 20-26, 2018, George R. Brown Convention Center, Houston, TX

We know safety, and we’re happy to announce that we will also be making our way to Houston, TX in October for the annual NSC Congress and Expo.

The nation's leading safety advocate for more than 100 years, the National Safety Council is a nonprofit organization with the mission of eliminating preventable deaths at work, in homes and communities, and on the road through leadership, research, education and advocacy. NSC advances this mission by engaging businesses, government agencies, elected officials and the public to help prevent the third leading cause of death in the U.S. – preventable injuries.

Enespro PPE has partnered with the NSC and looks forward to attending, showing off our newest products, and speaking with safety professionals on the expo floor. The NSC Congress & Expo is the world's largest annual "must attend" event for safety, health and environmental professionals. For more than 100 years, professionals have turned to this safety conference for industry-leading technology, education, networking opportunities and the tried and true products and services needed to stay at the forefront and remain competitive within the industry.

Meet Enespro PPE at Booth 506

Featuring a full week of learning, networking and product demonstrations, this event features the who’s who in the safety professional world, and we’re proud to say that we will run a press event and answer questions about our line of electrical PPE at booth 506.